Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Trusted Duct Repair & Sealing for Ballard Homeowners
Leaky ducts waste the heat you paid for and pull attic dust, insulation fibers, and crawlspace air into the rooms your family breathes in. In Ballard’s older bungalows and the newer townhomes packed along the side streets, we routinely find disconnected flex runs, taped joints that have dried out, and crushed trunk lines behind finished walls. Our technicians have up to 13 years of experience finding those failures, and they carry the sealing materials and repair fittings to fix what they find on the same visit. We use professional-grade equipment, including Rotobrush contact cleaners and Nikro negative-air machines, so the repair and the cleanup happen together. Call (844) 443-4768 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

What Our Duct Repair & Sealing Service Includes
Every one of these jobs is priced flat per system and agreed in writing before any work starts, so you know the number before a technician opens a single access panel. Here’s what each one covers.
Duct Sealing
Duct sealing closes the gaps at joints, seams, and connections so conditioned air reaches the rooms instead of leaking into unconditioned space. You need it when rooms never quite heat or cool the way the thermostat says they should, or when you notice higher bills without any change in how you run the system. We pressure-check the runs, seal the leaks we find, and show you before-and-after photos of the work on your own ducts.

Flex Duct Repair
Flex duct is the insulated flexible run most common in attics and crawlspaces, and it’s the part that fails most often: kinked, torn, pulled off its collar, or crushed underfoot. You need flex duct repair when a run has come loose at the register boot or the outer jacket has torn, which lets attic air mix with supply air. We reconnect, re-support, and re-seal the run properly rather than wrapping tape over a problem.

Metal Duct Repair
Metal ductwork is the rigid sheet-metal trunk and branch system found in older Ballard homes, and it tends to fail at seams, elbows, and where sections were joined. You need metal duct repair when you hear rattling, feel air escaping at a joint, or find rust and separation along a trunk line. We reseal seams, rejoin separated sections, and check that the trunk is properly supported so the repair holds.

Duct Insulation
Duct insulation wraps the ductwork so hot attics and cold crawlspaces don’t steal the conditioned air before it reaches a room. You need it when runs pass through unconditioned space with worn, missing, or compressed insulation, which causes sweating ducts and uneven room temperatures. We replace damaged insulation and make sure the vapor barrier is intact so the repair lasts.
Mastic Sealant
Mastic is a brush-on sealant that bonds to metal and stays flexible, and it’s the durable alternative to cloth or foil tape that eventually dries out and peels. You need mastic sealing when tape has failed at joints or when a system was never sealed properly in the first place. We apply mastic at the seams and connections where leaks start, which is a longer-lasting fix than tape.
Air Leak Repair
Air leak repair is the overall job of finding where a system is losing air and closing those leaks, whether that’s a boot, a collar, a plenum, or a register connection. You need it when you feel drafts at registers, see dust streaks around grilles, or the system runs long without keeping up. We use negative-air containment and pressure checks to locate the leaks, fix them on the spot, and confirm the repair.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Brands We Service for Duct Repair & Sealing
We work with the professional-grade equipment commercial contractors rely on, including Rotobrush and Nikro, and we’re familiar with the air-quality products many Ballard homes already have installed. That matters when a repair touches a filtration or purification component that needs to work correctly after the ductwork is sealed.
We know Honeywell and Aprilaire systems, two of the most widely installed residential filtration and air-quality brands, and we can recommend and service the equipment your home already has rather than pushing a replacement. We also work around Guardsman air-quality products and understand how they fit into a sealed, balanced system. Whether you have a Honeywell or Aprilaire setup, or any other make, we can help.
Signs You Need Duct Repair & Sealing Right Now
- Rooms that never keep up with the thermostat. If one bedroom stays cold while the rest of the house is comfortable, a disconnected or crushed run is a common cause. Sealing and repairing the run usually fixes the imbalance at its source.
- Dust streaks or dark marks around registers and grilles. Those marks are often a sign that air is escaping at a leak and pulling dust with it. It’s worth having the joints checked before the leak pulls more attic or crawlspace air into the home.
- Higher energy bills with no change in how you heat or cool. Leaky ducts send conditioned air into the attic instead of the rooms, so the system works harder for the same result. Sealing the leaks recovers that lost air.
- Visible tape peeling or separating at joints. Cloth and foil tape dry out and fail over time, and a failed joint is an open leak. Mastic sealant and proper reconnection are the lasting fix.
- Musty or dusty smells when the system runs. When a return or supply run has pulled loose near a crawlspace or attic, it can draw in damp, dusty air. Repairing and sealing the run closes that path.
Our Duct Repair & Sealing Process – Step by Step
- 1
Inspect the system. We start with a walk-through of the accessible ductwork and a pressure check to find where air is actually escaping. That tells us whether the problem is a joint, a disconnected run, or a larger trunk issue.
- 2
Set up containment. Before any repair work disturbs dust, we set up negative-air containment with Abatement Technologies filtration equipment, the commercial-standard practice for keeping work areas clean. This protects the rest of your home while we work.
- 3
Repair and seal. We reconnect loose runs, repair damaged flex and metal ductwork, and seal joints with mastic where it will hold best. This is the step where we fix what we find rather than just clean around it.
- 4
Verify the repair. We check the sealed system again to confirm the leaks are closed and airflow reaches the rooms it should. Before-and-after photos of your own ducts are part of the job, so you can see what was done.
- 5
Clean and finish. Where cleaning is needed as part of the work, we use Rotobrush contact cleaning and Nikro negative-air machines to leave the system clean and sealed. You get one flat price for the system, agreed before work started.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Duct Repair & Sealing Cost in Ballard?
Duct repair and sealing in Ballard typically runs from about $350 to $1,800 depending on how many runs need work, how accessible the ductwork is, and whether insulation or larger trunk repairs are involved. A single disconnected flex run or a handful of failed joints often lands at the low end, while a full attic system with crushed runs, damaged insulation, and multiple trunk leaks sits toward the high end. These are typical estimates; the written estimate sets the final price, and it’s free.

What moves the number: the number of runs, whether the work is in a tight crawlspace or a finished space, and whether metal or flex duct is involved. A simple way to avoid overpaying is to insist on a flat per-system price agreed before work starts rather than a low teaser that grows once a technician is on site. Your free estimate includes the pressure check, a clear scope of the leaks we find, and the flat price to fix them.
Duct Repair & Sealing Near Ballard – Our Service Area
We work across Ballard and the neighborhoods around it, including Crown Hill, Greenwood, Fremont, and Wallingford, plus Ravenna, Wedgwood, View Ridge, Maple Leaf, Bitter Lake, and Broadview. If you’re weighing whether the leaks are costing you more than a repair, start with air duct cleaning in Ballard and we’ll flag any sealing needed during the visit. For neighbors nearby, we also handle duct repair & sealing and duct repair & sealing across those areas, and the same flat-per-system pricing applies.
Serving Ballard, WA – Our Local Coverage Area
We serve Ballard and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Duct Repair & Sealing in Ballard
Duct repair and sealing is the work of fixing and closing leaks in your ductwork so conditioned air reaches the rooms instead of escaping into the attic, crawlspace, or walls. It covers reconnecting loose runs, repairing damaged flex and metal duct, replacing worn insulation, and sealing joints with mastic. It addresses the root cause of energy loss rather than just cleaning the surface. Call (844) 443-4768 for a free estimate.
Most residential duct repair and sealing jobs take a few hours to most of a day, depending on how many runs need work and how accessible the ductwork is. A single disconnected run is quick; a full attic system with multiple leaks and insulation repair takes longer. We give you a realistic time estimate with your written quote. Call (844) 443-4768 to set it up.
Typical duct repair and sealing in Ballard runs from about $350 to $1,800 depending on the number of runs, accessibility, and whether insulation or trunk repairs are involved. The written estimate sets the final price, and it’s flat per system rather than per vent. The estimate is free. Call (844) 443-4768 for an exact quote.
Yes, we’re familiar with Honeywell and Aprilaire air-quality systems and can recommend and service the equipment your home already has. We also work around Guardsman products where they’re part of your setup. Whether you have one of these brands or any other make, we can help. Call (844) 443-4768 to talk through your system.
Same-day service is available, and we send technicians with fast dispatch from 7am to 7pm, Sunday through Friday. We answer 24/7, and a call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. We’re closed Saturday. Call (844) 443-4768 to schedule.
Our repair and sealing work is backed, and we’ll explain the specifics in writing with your estimate so you know exactly what’s covered. Because we fix what we find on site rather than just cleaning, the repair itself is the priority. Ask us about the coverage for your particular job when you call. Call (844) 443-4768 with any questions.
Clear access to the registers, the attic hatch, and any crawlspace opening so the technician can reach the ductwork, and move valuables away from the work area. If you have pets, keep them secured while containment is set up. That’s really all you need to do; we handle the rest. Call (844) 443-4768 to get on the schedule.
Schedule Your Duct Repair & Sealing Service in Ballard Today
Leaky ducts are worth fixing at the source, and we’ll show you exactly what we find before any work starts. Call (844) 443-4768 for a free, no-obligation estimate on duct repair and sealing in Ballard. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. One flat price per system, before-and-after photos, and a repair that actually holds.
Written by the team at Air Duct Cleaning Ballard.