Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Duct Repair & Sealing Across Ballard
If your vents smell like a wet basement after the first fall rain, or a couple of rooms never warm up the way they should, you’re likely looking at failed duct seams rather than a furnace problem. We handle duct repair and sealing across Ballard, from the early-1900s wood-frame houses near the locks to the newer townhomes along the Market Street and 15th Ave corridors. Our technicians have up to 13 years of experience and know how these older systems are put together. Call (844) 443-4768. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Ballard Homeowners Call Air Duct Cleaning Ballard for Duct Repair & Sealing
Ballard has a lot of duct systems that were retrofitted into houses built long before forced air was common, and those installs have had decades to work loose. That’s the work we do here: finding the failed joint, the crushed run, the mastic that let go, and putting it right. We connect you with a licensed and insured local professional who works from a written, flat price per system agreed before anything starts, and who takes before-and-after photos so you can see what changed.
Local reputation matters in a neighborhood where people talk to their neighbors. Homeowners call us back because the job is explained in plain terms and the price doesn’t move once the work begins. Our technicians bring professional-grade equipment, including Rotobrush contact-cleaning systems and Nikro negative-air machines, along with Abatement Technologies filtration for containment during service. We can work with your insurer if a repair ties into a larger claim, and we don’t run teaser pricing that grows once someone is standing in your basement.
We serve Ballard and the surrounding blocks, so response times stay short for a scheduled visit. If a call comes in outside dispatch hours, it’s booked into the next opening, Sunday through Friday, 7am to 7pm.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Our Duct Repair & Sealing Services in Ballard
Our duct repair & sealing work covers the full run, not just the visible trunk. Here’s what we handle most often in Ballard homes.
Duct Sealing
Sealing is usually the real fix behind a comfort complaint in Ballard. In the neighborhood’s older wood-frame houses, seams and joints open up over time, and conditioned air escapes into a damp basement instead of reaching the register. We seal those gaps so the air stays in the duct where it belongs.

Flex Duct Repair
The 2010s and 2020s townhome and apartment infill along the Market Street corridor tends to run tight flex duct, and flex can kink or crush behind finished walls. A crushed run chokes airflow to a register and raises static pressure on the blower. We track down the pinch point and restore the run.

Metal Duct Repair
Original galvanized trunks in early-1900s Ballard homes develop pinhole leaks and separated joints in unfinished basements. We use camera inspection and agitation under negative pressure to locate failed seams, then repair the metal and close the gap.

Duct Insulation
Cold, damp basement runs sweat in a marine climate, and condensation on uninsulated duct is a common source of musty odor. Insulating those runs keeps the surface above the dew point and keeps the air inside closer to the temperature you paid to produce.
Trusted Brands We Service in Ballard
We’re familiar with the filtration and air-quality equipment already installed in a lot of Ballard homes, including Honeywell and Aprilaire systems, and with Guardsman products. That matters because a duct repair often touches the equipment at the other end of the run. We don’t claim to stock parts on a truck; we diagnose the system in front of us and recommend what fits it. Being product-agnostic means the recommendation is about your setup, not a brand we’re pushing. Professional-grade equipment, residential care, and a written estimate that sets the final price.
Common Duct Repair & Sealing Problems We See in Ballard Homes
- Corroded galvanized joints in damp basements. Original trunks in older Ballard houses separate at the seams and leak air into the crawlspace, which then finds its way back into the supply run. Repair and mastic sealing stop the leak at the source.
- Retrofit flex runs that kink behind finished walls. These choke airflow to a register and put extra load on the blower. Locating the crush is half the job; restoring the run is the other half.
- Cedar pollen and salt air gluing debris to duct walls. The sticky film masks small leaks until a cleaning exposes a disconnected run or failed mastic. That’s why we fix what we find during the same visit.
- Condensation and mildew in idle summer systems. Ballard’s cool marine climate leaves ducts damp for months, and mildew takes hold on wet surfaces. Sealing and insulating the affected runs cuts the moisture source.
See the difference
Before
After
Before
After
Before
AfterWhy Ballard’s Air Makes Duct Sealing a Moisture Problem
This is the part a generic sealing page misses. Ballard’s ducts carry a signature mix of cedar pollen from the neighborhood’s namesake ‘Ballard Cedars’ and marine salt air off Shilshole Bay. Those two combine into a resinous, sticky film that coats duct walls, and in the older wood-frame houses that film traps moisture against galvanized metal. That accelerates corrosion right at the joints and seams, a failure mode you rarely see a few miles inland where the air is drier and the pollen load is different. So for a lot of Ballard homes, sealing isn’t about shaving a few dollars off the heating bill. It’s about stopping damp basement air from being pulled into the supply ducts, which is exactly what produces the ‘Ballard smell’ locals notice after a wet fall when the old basement ducts start to sweat and the furnace comes back on.
Here’s how a typical job usually goes in these homes. The original galvanized supply trunks run through damp, unfinished basements and develop pinhole leaks or disconnected joints that bleed conditioned air into the crawlspace. A qualified technician uses camera inspection and agitation tools under negative pressure to locate the failed seams, then applies mastic sealant or heat-rated tape to restore the run. Often the musty cedar smell turns out to be moist air pulled through those gaps from the basement, not the ducts themselves.
For safety: poking around inside an active duct system near a furnace or air handler isn’t a DIY job. Sharp metal edges, live wiring, and the risk of pulling contaminated air into the living space make this work for a trained technician. We recommend having the system inspected before you start opening panels.
Pricing for Duct Repair & Sealing in Ballard, WA
Pricing here is per job, set by a written estimate agreed before work starts, so you know the number before anyone opens a panel. Typical Ballard ranges look like this:
- Duct sealing (mastic and tape on accessible runs): roughly $350 – $900 for a typical home
- Metal duct repair on failed galvanized joints: roughly $250 – $700 per affected run
- Flex duct repair or replacement of a crushed section: roughly $200 – $600
- Duct insulation on damp basement runs: roughly $300 – $800 depending on length
What moves the number is access, how many runs are affected, and whether the repair ties into a full cleaning. We don’t quote per-vent teaser prices and we don’t hand you a coupon that grows into a bigger invoice. The written estimate sets the final price, and before-and-after photos show the work. Estimates are free.
We Also Serve Cities Near Ballard
We work with homeowners beyond the neighborhood too: Crown Hill, Greenwood, Fremont, and Wallingford. The same older housing stock and marine climate show up across these areas, so the approach carries over. If you’re just outside Ballard and want the same flat-price, photo-documented service, give us a call and we’ll book a visit.
Serving Ballard, WA – Our Local Coverage Area
We serve Ballard and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Duct Repair & Sealing in Ballard
That smell is usually moist basement air being pulled into the supply ducts through failed seams, not the ducts themselves. The first fall rain saturates the ground and the older basement walls, the furnace kicks on, and the pressure difference draws that damp air in. Sealing the gaps stops it. Call (844) 443-4768 for an exact quote; estimates are free.
In most cases they can be sealed and repaired rather than replaced. Galvanized trunks that are still sound can be cleaned, have their failed joints re-sealed with mastic, and get insulation where condensation is the issue. Replacement comes up only when a run is crushed or rusted through. An on-site inspection tells you which situation you’re in. Call and we’ll set one up.
The marine climate makes sealing a moisture and corrosion job first, energy savings second. Cool, wet winters and idle summer systems leave ducts damp, and the cedar pollen and salt film traps that moisture against metal, corroding joints faster than in drier areas inland. That’s why we look at seams and insulation on every visit, not just airflow numbers.
Cleaning removes the accumulated film and debris; sealing closes the gaps that let contaminated or damp air back in. One without the other leaves the problem half-solved. Because the sticky pollen-and-salt film hides small leaks, we often find disconnected runs during a cleaning and fix them in the same visit. Call (844) 443-4768 to talk through which your home needs.
Often, yes, because the musty smell is usually damp basement air entering through failed seams. Sealing those joints, and insulating runs that sweat in the marine climate, cuts the moisture source. It’s not a promise in every case, but it’s the most common fix we see in older Ballard homes. Call for a free estimate and we’ll tell you what we find.
If your Ballard home has that cedar-and-mildew smell, cold rooms, or ducts you suspect are leaking into the basement, the fix is usually a repair and sealing job, not a new furnace. Our technicians use professional-grade equipment, work from a written flat price per system agreed before anything starts, and leave you with before-and-after photos of your own ducts. Call (844) 443-4768 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Air Duct Cleaning Ballard.