Dryer vent cleaning
Whole-home duct cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Trusted Dryer Vent Cleaning for Ballard Homeowners
If your dryer takes two cycles to finish a load, or the laundry room feels damp and warm after you run it, the vent line is the likely culprit. Lint packs into the ductwork a little at a time, and in Ballard’s older Craftsman homes and 1950s ranches, those runs are often longer or more crooked than anything a builder would install today. Our technicians have up to 13 years of experience opening up vent lines, pulling out the lint that’s collected, and finding the damaged sections behind it. We work with professional-grade equipment from Rotobrush and Nikro, the same systems commercial contractors specify. Same-day dryer vent cleaning is often available in Ballard when you call before the day fills up. Call (844) 443-4768 to get on the schedule.

Every job starts with an inspection, then a flat price per system agreed before any work begins. You see before-and-after photos of your own vent line when we’re done, not stock images from a brochure.
What Our Dryer Vent Cleaning Service Includes
Dryer vent work covers more than one pass of a brush. Here is what each part of the service means and when it comes up.
Dryer Vent Inspection
An inspection means we trace the whole vent line from the dryer’s back panel to the exterior termination and look for the failure points that lint and moisture cause over time. You need one whenever the dryer runs hot, the exterior flap doesn’t move, or it’s been more than a year since the last cleaning. We feed a camera through the run where it’s warranted, check for crushed or disconnected sections, and show you what’s actually inside before we quote anything.

Vent Cleaning
Vent cleaning is the full-length sweep of the duct from the dryer connection to the outside hood. It’s the right call for routine maintenance and for any dryer that’s venting into a clogged line. We run rotating contact-cleaning tools through the whole run and follow with negative-air capture so the lint we loosen goes into a HEPA-filtered machine instead of back into your laundry room. Abatement Technologies air filtration equipment keeps the work area clean while we’re at it.

Lint Removal
Lint removal targets the packed material that clings to duct walls, collects around the blower housing, and gathers behind the dryer. It’s needed most in Ballard homes where the dryer is pushed tight against the wall or the run goes up through the floor to a roof cap. We pull the accumulated lint from the duct, the transition elbow, and the dryer’s lint screen housing, then clear the floor area behind the appliance so you can see how much came out.

Vent Rerouting
Rerouting is when the vent path itself is the problem: too many elbows, a run that travels down instead of up, or a corrugated foil line crushed behind the dryer. That setup is worth correcting for any homeowner whose dryer has never vented well, no matter how often it’s cleaned. We map the existing route, propose a shorter and straighter path with rigid or semi-rigid metal duct, and make the change so the dryer can move air the way it was designed to.
Bird Guard Installation
A bird guard is a mesh screen that fits over the exterior vent hood to keep birds, squirrels and insects from nesting inside the duct. You need one if you’ve found twigs or nesting material at the termination, or if your exterior hood is a plain open flap. We clear any existing nest material from the line first, then fit a guard sized to the hood so it blocks pests without cutting the airflow the dryer needs.
Vent Cap Replacement
Vent cap replacement covers the exterior hood itself, including the flapper that keeps cold air and rain from backdrafting into the line. A broken flap, a missing screen, or a cap that’s been bent by falling branches all leave the duct open to weather and pests. We match a replacement cap to the duct size and wall or roof configuration, then confirm the flapper swings freely with the dryer running.
Once the vent side is sorted, many homeowners ask about the supply and return ducts in the same house. That work sits under Air Duct Cleaning Ballard, and we’ll go over it during your visit if you want.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Brands We Service for Dryer Vent Cleaning
Dryers come in every configuration, and the vent connection point differs by make. We’re familiar with the layout on the major appliance brands, and the tools we bring don’t care whose logo is on the dryer face. Our service focus is on the vent line itself and the fittings that connect it, so whether the appliance is a front-loader with a rear-right outlet or an older top-loader venting through the floor, we know where those transition pieces wear out and where lint tends to build.
We also work with widely installed air quality equipment from Honeywell and Aprilaire, and Guardsman filtration products, which matters when a vent problem has been sending fine lint dust through the rest of the house. We don’t sell equipment; we work with what’s already in your home, recommend service for it, and fix what needs fixing. Whether you have one of those systems or any other make, we can help.

Signs You Need Dryer Vent Cleaning Right Now
- Clothes take more than one cycle to dry. A dryer that suddenly needs two full runs is working against a restricted vent line, and the extra cycle time is the most reliable early warning. It also costs you on every load until the restriction is cleared.
- The laundry room gets hot and humid while the dryer runs. Warm, damp air that lingers instead of venting outside usually points to a disconnected or blocked run. In a Ballard basement laundry setup this often shows up as condensation on the walls near the dryer.
- The exterior vent flap won’t open, or you can’t find it. If you can’t feel air moving at the outside hood, the path is blocked somewhere between the dryer and the wall. A flap that stays shut also lets pests and moisture work their way into the duct.
- You smell a musty or scorched odor near the dryer. Lint that stays packed against a hot duct gets a smell, and overheating is exactly the condition you don’t want to ignore. Stop running the dryer until someone looks at the vent line.
- It’s been more than a year since the last cleaning, or you’ve never had one done. Lint accumulates whether you notice it or not, and a yearly check keeps the vent line clear of the buildup that dryer manufacturers warn about in their manuals. If you’ve moved into a Ballard house recently, start with a clean baseline.
Our Dryer Vent Cleaning Process – Step by Step
- 1
Walk-through and inspection. We start by pulling the dryer out, checking the transition duct, and tracing the full route to the exterior termination. A camera goes through the run where access is tight or the path is unclear, so we know what we’re dealing with before a tool goes in.
- 2
Containment setup. We set up negative-air containment with Abatement Technologies filtration equipment so loosened lint and dust stay in the equipment, not in your laundry room. Anyone with allergies or respiratory concerns appreciates this step more than they expect to.
- 3
Contact cleaning of the full line. Rotobrush contact-cleaning tools run the length of the duct, agitating lint off the walls, while Nikro negative-air machines pull it out of the system. We clean the transition elbow, the exterior termination and the lint screen housing along the way.
- 4
Repair and reseal. If we find crushed duct, a loose connection, or a failed cap, we fix it on the spot and seal the joints. The whole point of clearing a vent line is making sure the path stays intact afterward.
- 5
Final check and photos. We run the dryer, confirm airflow at the exterior flap, and clear up the work area. Then we show you before-and-after photos of your own vent line so you know exactly what was done.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Dryer Vent Cleaning Cost in Ballard?
Dryer vent cleaning in Ballard typically runs $150 – $275 for a standard single-family vent line, depending on the length of the run and how accessible it is. A longer route through a two-story wall or a rooftop termination usually lands $225 – $350. If the inspection turns up crushed duct or a damaged cap that needs replacement, expect the repair line item to add $75 – $200 to the job, quoted before any work begins.
What moves the price most is route complexity: number of elbows, whether the run goes straight out a wall or up through a roof, and whether the dryer is in a tight closet that takes time to access. Adding bird guards or new vent caps is priced separately and shown on the written estimate. Roof terminations take a trained technician on height, and we’d rather quote that honestly than shave a number and fix it later.
- Standard wall-vent run: $150 – $275
- Long or multi-elbow run: $225 – $350
- Vent cap or bird guard replacement: $75 – $200
- Vent rerouting for a poorly laid-out duct: $300 – $650
How to avoid overpaying: get the estimate in writing before work starts, ask what’s included, and be skeptical of a price quoted over the phone without an inspection. Every estimate from us is free and per job, so the final number is set by the written estimate, not by a per-vent count or an upsell done mid-job. Call (844) 443-4768 for an exact quote.
Dryer Vent Cleaning Near Ballard – Our Service Area
We serve homeowners across Ballard and out into the surrounding neighborhoods, including Crown Hill, Fremont, Wallingford and Greenwood to the east, and Broadview and Bitter Lake to the north. Ravenna, Wedgwood, View Ridge, Maple Leaf and Woodway are all within reach too. Most dryer vent jobs are scheduled for a same-day or next-opening window, and we can work around your day. If you’re in Greenwood or Crown Hill, dryer vent cleaning follows the same process described here.
Serving Ballard, WA – Our Local Coverage Area
We serve Ballard and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Dryer Vent Cleaning in Ballard
Dryer vent cleaning is the removal of built-up lint and debris from the duct that carries exhaust from your dryer to the outdoors. It includes the transition duct behind the dryer, the full run through the wall or floor, and the exterior vent hood. The purpose is airflow: a clear vent line lets the dryer exhaust moisture and heat efficiently and reduces the fire risk that packed lint creates.
A typical dryer vent cleaning takes about 45 minutes to an hour and a half, depending on the length of the run and any repairs needed. A straightforward wall-vent run goes quickly; a roof termination or a reroute takes longer. We’ll tell you up front what we expect for your setup.
A standard dryer vent cleaning in Ballard typically runs $150 – $275, with longer or more complex runs landing around $225 – $350. Vent cap replacement and bird guard installation are priced separately at $75 – $200. Call (844) 443-4768 for an exact quote; estimates are free and the written price is what you pay.
We service dryer vents across all major appliance brands, and we’re familiar with the different vent configurations you’ll find in homes around Ballard. The work is on the vent line and its fittings, so the brand of the dryer rarely changes the approach. Call (844) 443-4768 and tell us what you have.
Same-day dryer vent cleaning is often available in Ballard when you call before the day fills up, and we dispatch Sunday through Friday from 7am to 7pm. We answer 24/7, so a call outside dispatch hours is booked into the next opening. Call (844) 443-4768 to check today’s availability.
The written estimate is what we stand behind, and it spells out the scope of work and the price before we start. If something we serviced doesn’t perform the way it should, tell us and we’ll come back to look at it. Our technicians have up to 13 years of experience, and we’d rather fix a problem than leave you with a phone call that goes nowhere.
Clear access to the dryer, including the area behind and beside it, so we can pull the appliance out without moving your stored items. Move laundry off the top of the dryer and make sure the exterior vent is reachable from your yard if it’s on a ground-level wall. Let us know if the dryer has been running hot so we can prioritize the inspection.
Schedule Your Dryer Vent Cleaning Service in Ballard Today
If your dryer is taking too long to dry a load, or it’s just been a while, get the vent line checked before it becomes a bigger problem. We’ll inspect the full run, quote a flat price per system before work starts, and show you before-and-after photos of your own duct. Call (844) 443-4768 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Air Duct Cleaning Ballard.