Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Trusted HVAC Cleaning for Ballard Homeowners
The furnace runs, the air handler hums, and the house still smells like dust the moment the heat kicks on. In Ballard, that’s usually not a duct problem alone. The parts that move and condition the air – the blower wheel, the evaporator coil, the air handler cabinet – collect a fine grey film that no filter catches, and once it’s there, every cycle pushes it back through the rooms. Our technicians have up to 13 years of experience pulling those components apart, cleaning them properly, and putting them back the way the manufacturer intended.

We use professional equipment rather than shop-vac rigs: Rotobrush contact cleaning tools and Nikro negative-air machines, with Abatement Technologies filtration holding dust down while we work. We keep a strong local reputation, and we answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Call (844) 443-4768 and we’ll get an estimate on the calendar.
What Our HVAC Cleaning Service Includes
HVAC cleaning covers the mechanical heart of your system, not just the branch lines running to each register. When we open up a unit in Ballard, we look at six separate areas, and each one gets its own treatment.
Evaporator Coil Cleaning
The evaporator coil is the finned block inside the air handler where refrigerant absorbs heat from your indoor air. When the fins load up with dust and lint, airflow drops and the coil can ice over or struggle to keep up on a warm afternoon. We clean the coil in place when access allows, using a coil-safe cleaner and low-pressure rinse, and we check the drain pan and condensate line while we’re in there so water has somewhere to go.

Blower Cleaning
The blower wheel is a squirrel-cage fan that sits behind the air handler panel and pushes air through the whole house. Dust sticks to those curved blades and throws the wheel out of balance, which is one of the more common sources of a grinding or rumbling noise. We pull the blower assembly, clean the blades individually, and check the motor mounts before it goes back in.

Condenser Cleaning
The outdoor condenser rejects heat from the house, and its coil gets clogged from the outside in – pollen, cottonwood fluff, grass clippings, and the fine grit that blows off the ballfields and streets around Ballard. A dirty condenser makes the compressor work harder and run longer than it should. We clear the fins, check the fan blades, and confirm nothing is nesting inside the cabinet.

Air Handler Cleaning
The air handler cabinet is the box that houses the blower, coil, and often the filter rack. Its interior surfaces accumulate dust that re-enters the airstream no matter how clean the ducts are. We clean and sanitize the cabinet interior so the air leaving the unit is starting from a clean surface.
Heat Exchanger Cleaning
A furnace heat exchanger transfers heat from the burners into the airstream, and it collects soot and dust on its outer surfaces over time. Cleaning it improves heat transfer and lets us actually see the metal to check for cracks. That inspection matters for safety, which is why we treat this step carefully and recommend a licensed HVAC contractor for any repair beyond surface cleaning.
Coil Treatment
Coil treatment is the protective finish that goes on after cleaning. We apply a coating that slows future buildup and helps the coil shed moisture evenly, which cuts down on the damp, musty smell that comes from a coil that never quite dries out. It’s a small step that buys you more time between cleanings.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Brands We Service for HVAC Cleaning
We service Honeywell and Aprilaire filtration and air-quality equipment, and we know where each one wears out. Honeywell media cabinets tend to warp at the frame seal after a few seasons, which lets unfiltered air slip past the filter. Aprilaire humidifiers and filter housings build up mineral scale on the water panel and pad, and that scale is often the source of a white dust film on nearby surfaces. Knowing the equipment means we can recommend the right service instead of guessing.
On the cleaning side, our tools come from Abatement Technologies and Nikro, the same names commercial contractors specify for containment and negative-air work. That’s on purpose: the equipment a homeowner gets should be the equipment a building manager gets. If you already have a Honeywell or Aprilaire system in the house, we can work with it rather than around it. Whether you have those brands or any other make, we can help.
Signs You Need HVAC Cleaning Right Now
- Dust settles back within a day of cleaning. If the furniture is dusty again by the next morning, the source is usually upstream in the air handler or blower, not the living room. Cleaning the ducts alone won’t fix it.
- A musty or “dirty sock” smell when the system starts. That smell typically comes from a damp evaporator coil or a dust-loaded cabinet interior. It gets stronger over time and doesn’t clear on its own.
- Weaker airflow from the registers. A clogged blower wheel or a matted coil restricts airflow even when the filter is new. If some rooms never seem to get enough air, that’s worth a look.
- Higher energy bills with no other explanation. A dirty condenser and coil force the system to run longer to hit the same temperature. Extra runtime shows up on the bill before it shows up anywhere else.
- Recent renovation or remodeling dust. Drywall dust is fine enough to pass through standard filters and coat the coil and blower. A post-renovation HVAC cleaning is worth scheduling once the work is done.
Our HVAC Cleaning Process – Step by Step
- 1
Walkthrough and system check. We look at the equipment, the filter setup, and the duct layout, and we ask what you’ve noticed. That conversation usually tells us where to focus before we open anything.
- 2
Containment and negative air. We set up Abatement Technologies filtration and Nikro negative-air machines to hold dust inside the work zone. This is standard practice on commercial jobs and it belongs in a house too.
- 3
Component cleaning. The blower, coil, cabinet, and condenser get cleaned individually with Rotobrush contact tools and coil-safe cleaners. Each part is handled on its own rather than sprayed down as a unit.
- 4
Inspection and repair on the spot. While everything is open, we check for disconnected joints, torn insulation, and gaps at the plenum. We do air duct cleaning in Ballard as part of the same visit, and we can seal leaks while we’re there.
- 5
Reassembly and verification. We put the system back together, confirm airflow at the registers, and show you before-and-after photos of what we cleaned. One flat price per system, agreed before we start.
See the difference
Before
After
Before
After
Before
AfterHow Much Does HVAC Cleaning Cost in Ballard?
Most residential HVAC cleanings in Ballard fall somewhere between $350 and $900 for a single system, depending on how much equipment is being opened and how heavy the buildup is. A straightforward air handler and blower cleaning with a coil rinse tends to land at the lower end. A full job that includes the evaporator coil, blower, cabinet, condenser, and coil treatment runs higher, because each component takes time and access varies from unit to unit. Homes with more than one system, or with equipment tucked into a tight crawlspace or attic, sit at the upper end of that range.

What moves the number: the number of systems, how accessible the air handler is, how long it’s been since the last cleaning, and whether we find leaks or damage that need sealing. What doesn’t move it: the day of the week or how fast you need us.
To avoid overpaying, get the scope in writing before anyone opens a panel. A quote that lists “HVAC cleaning” without naming the coil, blower, and cabinet is a quote for something less than a full job. Our estimates are free, and the written estimate sets the final price. You’ll know what’s included before we start, and you’ll see photos of the work when we’re done. If you’re comparing options, start with a look at hvac cleaning so you know what a complete service actually covers.
HVAC Cleaning Near Ballard – Our Service Area
We work throughout Ballard and the neighborhoods around it, including Crown Hill, Greenwood, Fremont, Wallingford, and Ravenna. Homes in Crown Hill and Greenwood often have older forced-air systems that benefit from a careful component cleaning, and we schedule those alongside our hvac cleaning and hvac cleaning visits in the same general area. Scheduling is booked by appointment, and we’ll give you a realistic window when you call. If you’re further north in Bitter Lake, Broadview, or Maple Leaf, we cover those too.
Serving Ballard, WA – Our Local Coverage Area
We serve Ballard and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – HVAC Cleaning in Ballard
HVAC cleaning means cleaning the mechanical components that move and condition air: the blower wheel, evaporator coil, air handler cabinet, condenser, and heat exchanger. It’s different from duct cleaning, which handles the branch lines and registers, though the two are usually done together because contamination travels between them. Cleaning the HVAC unit without cleaning the ducts leaves dirt in the system, and the reverse is also true. We handle both in a single visit: air duct cleaning Ballard.
A typical single-system residential HVAC cleaning takes two to four hours. More time is needed when the air handler is in a tight attic or crawlspace, when the blower has to be fully removed, or when we’re cleaning ducts on the same visit. We’ll give you a realistic estimate when we quote the job, so you can plan your day. Setting aside a half day is usually the safe bet.
Expect roughly $350 to $900 for a residential system, with the final number set by the written estimate. The range depends on how many components are being cleaned, how many systems the house has, and how accessible the equipment is. We don’t quote per-vent prices or teaser rates, and we don’t add fees once we’re on site. Call (844) 443-4768 for an exact quote – estimates are free.
Yes. We work with Honeywell and Aprilaire filtration and air-quality equipment regularly and know the common failure points on both. If you have a media cabinet, humidifier, or air cleaner from either brand, we can clean and service it as part of the visit. If your equipment is a different make, we can still help – the cleaning principles are the same.
Same-day service is often possible when you call early. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. We’re closed on Saturday, so a call that comes in then gets booked into the next opening on Sunday. Call (844) 443-4768 and we’ll tell you what’s available.
We stand behind the work we do, and before-and-after photos document exactly what was cleaned. If something we cleaned or sealed doesn’t perform as described, call us and we’ll take a look. We’d rather come back and make it right than leave you guessing about whether the job was done.
Clear access to the air handler, furnace, and outdoor condenser, and move anything breakable away from the work area. If you have pets, put them somewhere quiet while equipment is running, since negative-air machines are loud. Have your filter size handy, and note any rooms with weak airflow or unusual smells so we can check those first. That’s all we need.
Schedule Your HVAC Cleaning Service in Ballard Today
If your system is moving dust, running long, or smelling off, a proper HVAC cleaning is the place to start. We’ll open the unit, show you what we find, and quote one flat price per system before any work begins. Call (844) 443-4768 for a free, no-obligation estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Air Duct Cleaning Ballard.