Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
See the difference
Before
After
Before
After
Before
AfterHow Much Does Duct Repair & Sealing Cost in Ballard?
Duct repair and sealing in Ballard typically runs $340 to $1,450, with most single-family homes landing between $450 and $800 for sealing a handful of accessible leaks plus a section repair. Small jobs like taping one disconnected joint start around $180 to $350, while a whole-system reseal in an older Ballard craftsman or a larger remodeled home can reach $1,900 to $3,200. The written estimate always sets your final price, and estimates are free.
A few things make Ballard pricing different from a generic national number. The housing stock here runs heavily to pre-war bungalows and mid-century ramblers with original sheet-metal trunks and short branch runs, and those systems leak at the joints in predictable places. We see a lot of them. Our technicians have up to 13 years of experience with exactly this kind of ductwork, and we use the same professional-grade equipment commercial contractors specify: Rotobrush contact-cleaning systems, Nikro negative-air machines, and Abatement Technologies filtration for containment during the work. Call (844) 443-4768. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- Most Ballard duct sealing jobs land between $450 and $800.
- Per-leak pricing usually runs $40 to $110 for accessible joints.
- Replacing a crushed or disconnected run typically costs $180 to $420 per section.
- Leaks you can’t see behind drywall, in a crawlspace, or in a tight attic are the biggest cost driver.
- Free written estimates, and the estimate is what you pay.
Duct Repair & Sealing Cost Breakdown (2026)
Here’s how the numbers break out for the Ballard market in 2026. These are typical ranges for residential work, not exact quotes. A short walkthrough and a written estimate pins down your number.
| Line Item | Typical Range | Notes |
|---|---|---|
| Leak sealing, per accessible joint | $40 – $110 | Taping and mastic at exposed connections |
| Section repair (crimped, crushed, or disconnected run) | $180 – $420 per section | Includes new fittings and reconnect |
| Sealing an average single-family system | $450 – $800 | Most common outcome in Ballard |
| Whole-system reseal, large or older home | $900 – $1,900 | Crawlspace and attic runs included |
| Full-system reseal with flexline replacement | $1,900 – $3,200 | When several runs have failed |
| Duct cleaning before sealing | $350 – $650 | Sealing over dust traps contamination |
| Crawlspace or tight-attic access surcharge | $75 – $250 | Difficulty of reaching the run |
| Sanitizing after repair | $150 – $400 | Standard for allergy households and post-renovation |
What pushes a number up or down comes down to access and condition. A leak at an exposed furnace plenum in a Ballard basement is quick work. A leak at a boot buried under finished floor on a remodeled second story is a different day. If your furnace sits in a crawlspace and the trunk runs through it, expect a bit more time in the estimate. And if you’ve just finished a renovation, sealing is usually paired with cleaning and sanitizing rather than done alone, because construction dust settles into every open joint before it gets sealed shut. That pairing is one of the reasons duct repair & sealing is worth scheduling before the drywall dust has fully settled.
What Affects Duct Repair & Sealing Pricing in Ballard
- Age and construction of the ductwork. Many homes in Ballard were built before flex duct existed, so the system is sheet-metal trunk-and-branch with taped joints that have dried and failed over decades. Each old joint is a candidate for sealing, and a system with thirty of them takes longer than a 1990s flex system with eight. Older rigid ductwork is durable and worth sealing, which keeps the price reasonable relative to replacement.
- Access. Ballard has a lot of homes with full basements and a fair number with furnaces tucked into crawlspaces or half-height attics. The tighter and lower the space, the slower the work. A crawlspace run adds time; a run boxed behind a finished ceiling adds more, because the repair has to be done without demolishing your ceiling.
- Type of failure. A loose joint takes minutes. A collapsed or disconnected run needs new fittings and a reconnect, which is a section repair rather than a seal. If your system has separated at the boot off the plenum, that’s one of the more common findings in this housing stock and it’s usually a straightforward fix.
- Whether cleaning comes first. Sealing a dirty system seals contamination in place. Most Ballard jobs start with cleaning so the surfaces being taped and coated are clean and the mastic can bond. This is standard practice with professional equipment like a Rotobrush contact-cleaning system, not an upsell.
- Filtration setup already in the home. If you have a Honeywell or Aprilaire filtration system installed, we account for it in the estimate so the sealing and the air handler work together instead of fighting each other. In many cases a leaky return is undermining the filter, and sealing that run solves a performance complaint that a new filter wouldn’t.
- Number of systems. Some Ballard homes have a zoned setup or a separate system for an addition. Two systems mean two rounds of inspection and sealing, and the second is usually cheaper than the first because the technician is already set up on site.
How to Save on Duct Repair & Sealing in Ballard
There’s no trick to lowering a duct sealing bill. There are things that genuinely help.
- Get the whole system looked at once. Sealing five leaks on a Tuesday and three more next spring costs more in visits than sealing eight together. A single walkthrough finds the leaks, and the per-leak price drops with volume.
- Pair sealing with cleaning. Almost every home that needs sealing also needs cleaning, and combining them on one visit saves you the second setup and labor call.
- Fix the cause, not the symptom. If a run is blowing warm air into the crawlspace, sealing it addresses the energy loss directly. Sealing is generally a fraction of the cost of replacing a duct system, so ask whether the failed section can be repaired instead of replaced.
- Ask about filtration. If you’ve got a Honeywell or Aprilaire system that’s underperforming, sealing the leaks around it often restores performance and clarifies whether it needs any service at all.
- Ask the technician to note what’s failing. A written record of which joints failed tells you the system’s pattern and helps you prioritize if you can’t do everything at once.
When you’re ready for numbers, call (844) 443-4768. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, and the number in the written estimate is the number you pay.
If you need the full-system view first, start with air duct cleaning Ballard and let the technician map your system before any sealing work.
FAQs – Duct Repair & Sealing Cost
Is it cheaper to repair and seal ductwork or replace it?
Sealing is cheaper in most cases. A typical whole-system reseal in Ballard runs $900 to $1,900, while replacing failed runs across a house usually starts well above that, and full-system replacement goes higher still. The exception is ductwork that’s collapsed or so water-damaged it can’t hold mastic; then replacement is the honest answer. Call (844) 443-4768 for a free estimate – the technician will tell you which side of that line your system sits on.
How much does sealing a single leaky joint cost in Ballard?
An exposed, accessible joint runs $40 to $110 to seal with tape and mastic. That price assumes the joint is reachable in a basement or an open attic. Buried joints or ones behind finished walls add access time. Call (844) 443-4768 for an exact quote – estimates are free.
Can you come today?
Same-day visits are often available for duct work, though a full system inspection and sealing usually books as a scheduled visit because it takes a block of time. Call (844) 443-4768 and we’ll give you the earliest opening. We answer 24/7, and we dispatch fast from 7am to 7pm, Sunday through Friday.
Do I need duct cleaning before sealing?
Yes, in almost every case. Cleaning runs $350 to $650 and most jobs are cheaper combined than done separately, and sealing over a dirty system traps debris and keeps the mastic from bonding. Our technicians use Rotobrush contact-cleaning systems and Nikro negative-air machines, so the surfaces are clean before any repair starts. Call (844) 443-4768 for a free estimate on the combined job.
Why does sealing cost more in a crawlspace or tight attic?
Access surcharges run $75 to $250 for a crawlspace or a low attic where the technician has to work in a confined space. It’s labor time, not a markup on materials. If your furnace is in a crawlspace, expect this line on the estimate. Call (844) 443-4768 – the estimate is free and the written number is what you pay.
Does air quality sanitizing add much to the cost?
Sanitizing runs $150 to $400 on top of repair and sealing, and it’s typically chosen by households dealing with allergies, a family member with respiratory sensitivity, or post-renovation dust. It’s not required, but it’s the last step if clean air is the goal. Call (844) 443-4768 for an estimate that includes it.
What equipment do you use for duct repair and sealing?
Our technicians use the same professional-grade equipment commercial contractors specify: Rotobrush contact-cleaning systems, Nikro negative-air machines, and Abatement Technologies air filtration for containment during the work. That containment practice is standard on commercial jobs and less common on residential ones, and it keeps debris from migrating through the house while we work. Call (844) 443-4768 to talk through what your system needs.
Is the estimate really free?
Yes. The walkthrough, the inspection, and the written estimate cost nothing. The written estimate sets the final price, and you decide from there. Call (844) 443-4768. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Duct Repair and Sealing in Ballard, Done Properly
Sealing ductwork is one of the few HVAC jobs where the work is invisible and the result shows up on your utility bill and in how the house feels. The right approach is straightforward: inspect the whole system, clean the surfaces, repair what’s failed, and seal the rest. That’s what our technicians do, and they do it with the equipment specified for commercial contractors because residential air systems benefit from the same standard.
Our technicians have up to 13 years of experience. We cover duct cleaning, dryer vent cleaning, HVAC cleaning, duct repair and sealing, and air quality sanitizing, and we’re familiar with Honeywell, Aprilaire, and Guardsman products, so we can work with whatever is already in your home. If your dryer vent is part of the system you’re worried about, include it in the same visit. Dryer vents are a fire-safety matter and worth the look.
Call (844) 443-4768 for a free estimate on duct repair and sealing in Ballard. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. The written estimate sets the final price, and the price is per job.
Pricing reflects the Ballard market as of 2026. Air Duct Cleaning Ballard offers free estimates – call (844) 443-4768.
Written by the team at Air Duct Cleaning Ballard.
What Our Customers Say
"They photographed every return and supply before starting and sent me the file afterward. No upsell to a sanitizing treatment I didn't need."
- Renee Walsh"My wife's allergies had been bad in this house since we moved in. It's been two months since they did the ducts and it's noticeably better. Not a miracle, but real."
- Scott Sutton"Did the dryer vent while they were here for a small add on price. The dryer now finishes a load in one cycle instead of two."
- Shane Vaughn